Watch the setup video here
Also, you may follow the instructions below:
Launch the Immerse Virtual Studio standalone application.
a. Set your Channel Configuration to 7.1.2 SMPTE or your desired channel configuration.
b. On the top left, select Options -> Audio Midi Settings
c. Set Input to Immerse Audio Bridge
d. Output to your headphones device
e. Select your desired sample rate
f. Uncheck the "Feedback loop"
Open the Dolby Atmos Renderer Standalone. and go to Preferences -> Driver.
a. Set the Audio Driver to Core Audio
b. Set the Audio output device to “Immerse Audio Bridge”.
c. Click on Accept.
Set up Dolby Atmos Renderer to your desired Speaker Layout output.
For this example, we will use a 7.1.2 setup
a. Go to Window -> Room Setup -> Monitoring.
b. Add Monitoring layout
c. Name it 7.1.2.
d. In this layout, the following channels are selected : L, C, R, LFE, Ls, Ltm, Rtm, Rs, Lrs, Rrs.
e. Select Routing tab. Assign the following routing (compatible up to 9.1.6) as shown below.
L = 1, R = 2, C = 3, LFE = 4, Ls = 5, Rs = 6, Lrs = 7, Rrs = 8, Ltm = 9, Rtm = 10, Ltf = 11, Rtf = 12, Lw = 13, Rw = 14, Ltr = 15, Rtr = 16.
4. If playing back an ADM file:
a. Click on File -> Open Master File
b. Select Source as “Master”.
5. Click on the button to the left of Stop and then Hit Play in the Dolby Atmos Renderer to start listening!
How to setup Immerse Virtual Studio Standalone with Pro Tools?